Commercial Strip Out

Guide · Restaurant owners · 3 min read · Updated 17 November 2026

Restaurant and Commercial Kitchen Strip Out: A Practical Guide

Short answer

A restaurant or commercial kitchen strip out removes catering equipment, canopies and extraction ductwork, cold rooms, bars, seating and finishes, with gas disconnected by a Gas Safe registered engineer and refrigerant recovered by an F-gas certified technician. Most jobs take a few days to two weeks and cost £4,000–£15,000, depending on size, extraction complexity and how much equipment can be sold.

Restaurant and Commercial Kitchen Strip Out: A Practical Guide

What a kitchen strip out includes

Restaurant and kitchen strip outs are more involved than a typical shop because of the equipment and services. Gas, electricity, water and drainage all feed the kitchen, extraction runs through the building to the roof or an external wall, and refrigeration contains fluorinated gases. Each needs proper isolation before removal.

Front of house brings its own work: bars with plumbing and cellar lines, fixed seating and banquettes, feature lighting, flooring and signage. The table summarises the main elements and who deals with them.

ElementWhat is involvedSpecialist needed
Gas ranges, fryers, ovensDisconnect, cap and removeGas Safe registered engineer
Canopy and extractionDismantle canopy, ductwork and fanStrip out team, working at height
Cold rooms and fridgesRecover refrigerant, dismantle panelsF-gas certified technician
Bars and cellar linesRemove counters, back bar, beer linesStrip out team, plumber
Stainless steel tables and sinksDisconnect and removePlumber for waste and water
Flooring and wall claddingLift safety flooring, remove hygienic claddingStrip out team

Gas, refrigerant and grease

Gas appliances must be disconnected and the supply capped by a Gas Safe registered engineer before anything is moved. The engineer should leave a record of the work. Do not let anyone without that registration touch gas pipework.

Cold rooms, under-counter fridges, ice machines and air conditioning contain refrigerant, which must be recovered by an F-gas certified technician before the equipment is disconnected. The technician should provide a record of what was recovered.

Extraction ductwork and canopies are usually coated in grease, especially if cleaning has lapsed. Grease is a fire risk during dismantling, particularly if hot work such as cutting is used. Good contractors avoid hot work where possible, clean or contain heavily greased sections and keep fire extinguishers to hand. Grease traps and separators should be emptied by a licensed waste contractor before removal.

Selling equipment before the strip out

Commercial catering equipment holds value. Combination ovens, refrigeration, dishwashers, coffee machines and stainless steel tables can often be sold to used equipment dealers or the incoming tenant. Doing this before the strip out reduces both the contractor's labour and the waste to be removed.

Leased equipment should be returned to the leasing company, so check your agreements first. Anything sold should be disconnected safely by the right trade before collection.

  • List all equipment with makes, models and ages
  • Check which items are leased or financed
  • Offer equipment to the landlord or incoming tenant
  • Contact used catering equipment dealers
  • Arrange disconnection by the right trade before collection
  • Let the strip out contractor know what has gone

Timings and working hours

A small café or takeaway can often be stripped in two to four days. A full restaurant with a large kitchen, extensive extraction and a bar typically takes one to two weeks. Extraction running through several floors or across a roof can add time, particularly if scaffolding or a cherry picker is needed.

In town centres, working hours and loading times may be restricted, and neighbours above or beside the unit will need to be considered. Agree working hours with the landlord and plan noisy tasks for times that suit neighbouring occupiers.

Reinstatement and making good

Once equipment is out, the unit usually needs making good. Holes in walls and roof where extraction passed through must be sealed and weathered properly. Capped services should be labelled. Drainage connections should be capped to prevent smells and pests. Floor channels and gullies may need filling if the lease requires a level floor.

If you are leaving the premises, check the lease and any licence for alterations to see what reinstatement is required. Landlords sometimes prefer to keep the extraction system or bar for the next restaurant tenant, which can save significant cost if agreed in writing.

Our guide price for a restaurant or kitchen strip out is £4,000–£15,000, including isolation arrangements, equipment removal and waste disposal.

Waste from a kitchen strip out

Kitchen strip outs produce a lot of stainless steel, which has good scrap value. Other streams include WEEE from appliances and controls, refrigeration units after gas recovery, timber and laminate from bars and seating, safety flooring, plasterboard and general mixed waste. Grease and food waste need separate handling.

All waste must go to registered carriers and permitted sites, with waste transfer notes and consignment notes for any hazardous items. Ask for the paperwork at the end of the job.

Planning checklist for owners

If you are closing or moving a restaurant, work through the strip out in a set order. First, read your lease and any licence for alterations to understand what must be removed. Second, list your equipment and decide what to sell, return or leave. Third, speak to the landlord about any items they might want to keep, such as extraction or the bar.

Then get fixed quotes that include gas disconnection, refrigerant recovery, grease trap emptying, equipment removal, making good and waste disposal. Book the work with enough time to finish before you hand back the keys. Finally, hold a joint inspection with the landlord and keep photos, certificates and waste paperwork together for your records. Following that order keeps surprises to a minimum.

If anything is unclear, ask before work starts rather than after.

Questions people also ask

How much does a restaurant strip out cost?

On our guide prices, a restaurant or commercial kitchen strip out typically costs £4,000–£15,000. Small cafés sit at the lower end, while large restaurants with complex extraction, cold rooms and bars sit at the upper end. Selling equipment before the strip out can reduce the cost.

Who disconnects gas in a commercial kitchen?

A Gas Safe registered engineer must disconnect and cap gas appliances and pipework. This is required under the Gas Safety (Installation and Use) Regulations 1998. Never allow anyone without the appropriate registration to work on gas in a commercial kitchen.

Can I leave the extraction system for the next tenant?

Possibly. Some landlords prefer to keep a working extraction system, bar or cold room for the next restaurant tenant. Check your lease and licence for alterations, and agree in writing with the landlord what can stay. It can save significant time and cost.

Written and checked by the Commercial Strip Out team. Read our editorial policy.

Get a free commercial strip out quote

Tell us what you need and we'll come back with a clear price.

Request a quote