Guide · Businesses · 4 min read · Updated 17 November 2026
Commercial Strip Out Cost UK: 2026 Price Guide per Sq Ft
Short answer
Commercial strip out in the UK typically costs £4–£9 per sq ft to return an office to Cat A, and £6–£14 per sq ft to strip an office or retail unit back to shell. A small shop costs £2,500–£8,000, a restaurant or commercial kitchen £4,000–£15,000, pallet racking removal from £8 per bay and mezzanine removal £25–£60 per square metre.
Guide prices for common strip outs
Commercial strip out is usually priced per square foot for offices and larger units, and as a fixed sum for smaller shops and restaurants where the specific contents drive the cost. The price covers labour, plant, protection, segregation of waste and disposal through registered carriers. It may also include isolation of services, depending on the job.
The table shows the guide prices we work to in 2026. Every building is different, so treat these as a starting point. A fixed quote follows a site visit or a walk-through with drawings and photos.
| Job | Guide price | What it typically covers |
|---|---|---|
| Office strip out to Cat A | £4–£9 per sq ft | Tenant partitions, kitchens, cabling and finishes removed |
| Office or retail back to shell | £6–£14 per sq ft | Ceilings, raised floors and services stripped too |
| Small shop strip out | £2,500–£8,000 | Shelving, counters, flooring, ceiling and signage |
| Restaurant or kitchen strip out | £4,000–£15,000 | Equipment, canopy, extraction and bar |
| Pallet racking removal | from £8 per bay | Often offset by steel scrap or resale value |
| Mezzanine floor removal | £25–£60 per m² | Depends on size, height and deck type |
Cat A versus shell: why the price differs
Cat A means the landlord's base build: suspended ceilings, raised floors, basic lighting, air conditioning and finished walls, with no tenant fit-out. A strip back to Cat A removes the tenant's partitions, meeting rooms, kitchens, data cabling and specialist finishes while leaving the base build in place. The work is more careful, because the team must protect what stays.
Shell means a bare structure with capped services: no ceilings, no raised floors, no lighting, often no air conditioning. Stripping to shell removes much more material and generates more waste, which is why it costs more per square foot. It is common before major refurbishment or change of use.
Your lease or the incoming tenant's specification will usually tell you which condition is needed. Check carefully, because the difference can be substantial over a large floor plate.
What drives the price
Size is the obvious factor, but access and logistics often matter more. An upper-floor office with a small passenger lift, no goods lift and restricted loading times takes far longer to strip than a ground-floor unit with a roller shutter onto a yard. City centre jobs may need out-of-hours working, which raises labour costs.
The materials and services involved also count. Raised floors and suspended ceilings are quick to remove. Specialist kitchens, cold rooms, extraction ductwork, comms rooms and fixed racking take longer and need trades such as gas engineers and F-gas technicians. Asbestos, if found, is dealt with separately by suitably licensed or trained contractors.
- Floor area and target condition: Cat A or shell
- Lift access, loading bay and permitted working hours
- Need for out-of-hours or weekend working
- Specialist items: kitchens, cold rooms, extraction, comms rooms
- Service isolation by gas, electrical and F-gas engineers
- Asbestos survey findings
- Scrap and resale value of steel, racking and equipment
Waste and recycling costs
Waste is a large part of every strip out. Mixed construction and demolition waste costs more to dispose of than segregated streams, so good teams separate on site: metal, timber, plasterboard, ceiling tiles, carpet tiles, glass and WEEE. Metal often has scrap value, and some items such as raised floor panels, carpet tiles and racking can be resold or reused, which reduces the net cost.
Some materials need specific routes. Fluorescent tubes and some lighting are hazardous WEEE. Plasterboard must be kept separate from mixed waste at landfill. Refrigerant must be recovered before equipment is removed. Each of these is priced into a proper quote.
Getting an accurate quote
For an accurate fixed price, provide the floor area, the target condition, drawings if you have them, photos of each area, the building's asbestos register or survey, and any landlord rules on working hours and lift use. A site visit is usually worthwhile for anything above a small shop.
Ask for the quote to set out what is included: protection, service isolation, waste segregation, making safe, and the condition the space will be left in. Clear scope avoids extras later.
We arrange commercial strip outs through vetted, insured contractors across the UK, with waste taken by registered carriers and transfer notes provided.
Ways to reduce the cost
Sell or donate furniture and IT equipment before the strip out starts, using a specialist where data must be destroyed. Agree with the landlord exactly what must be removed, because some items may be accepted as left in place. Allow a sensible programme rather than a rushed one, as compressed timescales mean more labour and out-of-hours working.
Where the next tenant or your own refurbishment will need some existing items, such as raised floors or ceilings, leave them in place and avoid paying to remove and replace them.
Warehouse and industrial units
Warehouse and industrial strip outs are priced differently from offices because the work is dominated by steel. Pallet racking is dismantled bay by bay from £8 per bay, and mezzanine floors are taken down at £25–£60 per square metre depending on height, deck type and how lifting equipment can reach them. Office pods, partitioning and redundant services are removed alongside.
Because racking and mezzanine steel have scrap or resale value, the net cost of an industrial strip out is often lower than its size would suggest. Good condition racking from a recognised manufacturer can be resold, while damaged sections go for scrap. Make sure your quote shows how that value has been reflected, and whether any racking inspection reports are available to help resale.
Questions people also ask
How much does it cost to strip out an office per square foot?
On our guide prices, an office strip back to Cat A typically costs £4–£9 per sq ft, and a full strip back to shell £6–£14 per sq ft. The exact figure depends on the size, access, working hours, specialist items and how much waste can be recycled or resold.
Is waste disposal included in a strip out quote?
It should be. A proper quote includes segregation, removal and disposal of all strip out waste through registered carriers, with waste transfer notes and consignment notes for any hazardous waste. Check this is stated clearly, because some low quotes leave waste as an extra.
Does scrap value reduce the cost of a strip out?
Often, yes. Steel racking, mezzanine steel, copper cabling, aluminium ceiling grid and some equipment have scrap or resale value. A good contractor will reflect that in the price. It is most significant on warehouse and industrial jobs with large amounts of steel.
Written and checked by the Commercial Strip Out team. Read our editorial policy.
More guides
Cat A vs Cat B vs Shell: Office Fit-Out Grades Explained
Shell and core is the bare structure with capped services and common parts finished. Cat A adds the landlord's base build: suspended ceilings, raised…
Dilapidations and Strip Out at the End of a Commercial Lease
At the end of a commercial lease, the tenant usually has to remove alterations, reinstate the premises and carry out repairs and redecoration under…
Commercial Strip Out Regulations UK: CDM, Asbestos and Waste
Commercial strip outs in the UK must comply with the Construction (Design and Management) Regulations 2015, which require planning and competent…
Restaurant and Commercial Kitchen Strip Out: A Practical Guide
A restaurant or commercial kitchen strip out removes catering equipment, canopies and extraction ductwork, cold rooms, bars, seating and finishes,…
Get a free commercial strip out quote
Tell us what you need and we'll come back with a clear price.
Request a quote