Guide · Tenants · 3 min read · Updated 17 November 2026
Cat A vs Cat B vs Shell: Office Fit-Out Grades Explained
Short answer
Shell and core is the bare structure with capped services and common parts finished. Cat A adds the landlord's base build: suspended ceilings, raised floors, lighting, air conditioning and finished walls, but no tenant layout. Cat B is the tenant's fit-out: partitions, meeting rooms, kitchens, furniture and branding. A strip out returns a space from Cat B to Cat A or all the way to shell.
The three conditions in plain terms
Office space in the UK is commonly described in three grades. They are not legal definitions, and exact specifications vary between buildings, but the industry uses them consistently enough that leases, agents and contractors all understand what is meant.
Knowing which grade you are starting from and which you need to reach is the first step in planning any strip out. It decides the scope of work, the programme and the price.
| Condition | What is in place | Typical strip out cost |
|---|---|---|
| Shell and core | Structure, capped services, finished common parts | £6–£14 per sq ft to return a fitted space here |
| Cat A | Ceilings, raised floors, lighting, air conditioning, basic finishes | £4–£9 per sq ft from Cat B |
| Cat B | Partitions, meeting rooms, kitchens, furniture, branding, data | Starting point for most strip outs |
What a Cat B to Cat A strip out involves
Stripping from Cat B to Cat A removes the tenant's fit-out while protecting the landlord's base build. The team takes out demountable and fixed partitions, glazed meeting rooms, tea points and kitchens, comms rooms, data cabling, specialist lighting, feature ceilings, branding and any floor finishes the lease says must go.
Because the ceiling, raised floor and air conditioning stay, the work is careful rather than heavy. Ceiling tiles disturbed for cable removal are replaced, floor grids are checked and damaged items noted. Services added by the tenant, such as extra power or cooling for a server room, are disconnected and made safe back to the base build.
This is the most common strip out at the end of an office lease.
- Partitions and glazed meeting rooms
- Kitchens, tea points and associated plumbing
- Comms rooms, data cabling and containment
- Tenant lighting and feature ceilings
- Signage, branding and manifestations
- Floor finishes, if the lease requires
What a strip to shell involves
Stripping to shell goes further, removing suspended ceilings and grid, raised access floors and pedestals, lighting, the distribution parts of the air conditioning and often wall finishes. Services are isolated and capped. The result is a bare floor plate ready for a new fit-out or a change of use.
Shell strip outs generate far more waste, need more plant and take longer. They are common before major refurbishment, when a landlord is upgrading a building to a new standard, or when a unit is being converted to another use. They also need more careful planning around asbestos, because more of the building fabric is disturbed.
Which condition does your lease require?
Your lease will usually set out how the premises must be handed back. Look for the yielding up clause, the reinstatement clause and any licence for alterations granted during the lease. Licences often require the tenant to remove their alterations and reinstate the premises at the end of the term, unless the landlord says otherwise.
Leases vary widely, so read them carefully or take advice. Some require a return to the condition at the start of the lease, which might be Cat A. Others are less specific. A landlord may also prefer to keep some tenant items, such as partitions or a kitchen, if they help with re-letting. Agree that in writing before you start.
Planning the strip out
Once the target condition is clear, a contractor can survey the space and produce a scope and programme. The survey should check access, lifts, loading arrangements, working hours, the asbestos register and any landlord rules. The Construction (Design and Management) Regulations 2015 apply, so the contractor should provide a construction phase plan proportionate to the risks.
Agree with the landlord how the space will be inspected at the end. A joint walk-round with photos and a short sign-off note avoids disputes later about what was or was not removed.
Common misunderstandings
The most common confusion is assuming Cat A is the same everywhere. A Cat A specification in one building may include features absent in another, so always compare against what was actually present when your lease began. A schedule of condition from the start of the lease, if one exists, is invaluable.
Another is assuming a strip out ends the matter. If the lease also requires redecoration or repairs, those are separate from the strip out and should be planned alongside it.
Cat B to Cat B: reusing a fit-out
Not every strip out has to go all the way back to Cat A. Increasingly, incoming tenants are willing to take on part of an existing fit-out, such as meeting rooms, a kitchen or a reception, and adapt it rather than start again. This saves the outgoing tenant strip out costs and the incoming tenant fit-out costs, and it reduces waste.
If you are leaving, ask your agent and landlord early whether the next occupier might want any of your fit-out. If you are arriving, ask what is available before you commit to a full new design. Any arrangement should be recorded in writing between landlord, outgoing tenant and incoming tenant, so it is clear who is responsible for the retained items at the end of the next lease.
Even partial reuse, such as keeping a kitchen and stripping everything else, can make a noticeable difference to cost and programme.
Questions people also ask
What does Cat A mean in an office?
Cat A is the landlord's base build: suspended ceilings, raised floors, lighting, air conditioning and finished walls, ready for a tenant to fit out. It has no partitions, meeting rooms, kitchens or furniture. Exact specifications vary by building, so compare against what was in place at the start of your lease.
Is shell and core cheaper to strip to than Cat A?
No. Stripping to shell removes more material, including ceilings, raised floors and some services, so it generates more waste and costs more, typically £6–£14 per sq ft against £4–£9 for Cat A. It is usually needed before major refurbishment or change of use.
Do I have to strip my office back to Cat A at the end of the lease?
It depends on your lease and any licence for alterations. Many require tenant alterations to be removed and the premises reinstated. Some landlords prefer to keep certain items. Read the reinstatement and yielding up clauses and agree the scope with the landlord in writing before starting.
Written and checked by the Commercial Strip Out team. Read our editorial policy.
More guides
Commercial Strip Out Cost UK: 2026 Price Guide per Sq Ft
Commercial strip out in the UK typically costs £4–£9 per sq ft to return an office to Cat A, and £6–£14 per sq ft to strip an office or retail unit…
Dilapidations and Strip Out at the End of a Commercial Lease
At the end of a commercial lease, the tenant usually has to remove alterations, reinstate the premises and carry out repairs and redecoration under…
Commercial Strip Out Regulations UK: CDM, Asbestos and Waste
Commercial strip outs in the UK must comply with the Construction (Design and Management) Regulations 2015, which require planning and competent…
Restaurant and Commercial Kitchen Strip Out: A Practical Guide
A restaurant or commercial kitchen strip out removes catering equipment, canopies and extraction ductwork, cold rooms, bars, seating and finishes,…
Get a free commercial strip out quote
Tell us what you need and we'll come back with a clear price.
Request a quote