Kent · South East
Commercial Strip Out in Gravesend
If your lease in Gravesend is ending, our contractors can carry out dilapidations works across Kent before handback.
Where we work around Gravesend
Gravesend is in the Kent council area in the South East. Jobs here are mostly in the DA12, DA11 and SG11 postcode areas. The same team covers Northfleet, Ebbsfleet Valley, Chadwell St Mary, Tilbury and Gravesham too.
Commercial Strip Out in Gravesend: local know-how
Offices on the edge of Gravesend can often host skips on site without needing a road permit. Suburban shopping parades in Gravesend often have rear service yards that suit daytime strip outs.
The South East has a large share of 1930s semi-detached housing and post-war estates, with plenty of new-build development around its larger towns. Older premises in Gravesend are more likely to contain asbestos, so surveys must be done before any fabric is disturbed.
What we can do in Gravesend
Retail and Shop Strip Out
Shopfronts, signage, shelving, counters, flooring and stockroom racking removed so units can be handed back or refitted quickly.
Office Strip Out
Partitions, suspended ceilings, raised floors, carpet tiles, kitchens and data cabling removed from offices of any size, back to Cat A or shell.
Dilapidations and Lease-End Reinstatement
Strip out and make-good works that return premises to the condition set out in the lease, helping tenants reduce dilapidations claims.
Soft Strip Before Refurbishment or Demolition
Removal of all non-structural materials before refurbishment or demolition, separating waste streams so the main works start on a clean shell.
Industrial and Warehouse Unit Strip Out
Mezzanine floors, pallet racking, office pods, machinery bases and redundant services cleared from warehouses and industrial units.
Restaurant and Commercial Kitchen Strip Out
Catering equipment, canopies, extraction, cold rooms, bars and seating removed from restaurants, pubs and cafes, with gas and refrigerant handled properly.
Typical costs in Gravesend
- Office or retail back to shell: £6–£14 per sq ft. Full strip including ceilings, raised floors and services, depending on complexity and access.
- Office strip out to Cat A: £4–£9 per sq ft. Removal of tenant partitions, kitchens, cabling and finishes while keeping the landlord's base build.
- Mezzanine floor removal: £25–£60 per m². Depends on size, height, deck type and access for lifting equipment.
Prices are a guide. Your quote for Gravesend is a fixed price based on the details you give us. Full price guide.
Commercial Strip Out questions from Gravesend
Can you strip out a shop in Gravesend quickly between tenants?
Yes. Retail strip outs in Gravesend are often done in two to four days. Contractors plan around landlord access, centre rules and the incoming tenant's start date so the unit is ready on time.
Can strip out work in Gravesend happen at night or weekends?
Yes. Contractors in Gravesend regularly work evenings, nights and weekends for shopping centres, occupied offices and busy streets. Out-of-hours work costs more, but it keeps disruption to neighbouring tenants and customers to a minimum.
Do you strip out restaurants in Gravesend?
Yes. Restaurant and kitchen strip outs in Gravesend include equipment, canopies, extraction, bars and seating. Gas is isolated by a Gas Safe engineer and refrigerant is recovered by an F-gas certified technician before units are removed.
Is an asbestos survey needed for strip outs in Gravesend?
Yes, a refurbishment and demolition asbestos survey is required before strip out work disturbs building fabric. Many older buildings in Gravesend contain asbestos, so the survey must be checked and any findings dealt with before work starts.
How long does a commercial strip out take?
A small shop or office usually takes two to five working days. A 10,000 square foot office or restaurant can take one to two weeks, and large industrial units with racking and mezzanines can take longer. Out-of-hours working, goods lift access and asbestos findings are the main things that change timescales.
What is the difference between Cat A and back to shell?
Cat A is a basic finished space with the landlord's ceilings, lighting, raised floors, air conditioning and toilets in place, but no tenant fit-out. Back to shell removes almost everything internal, leaving bare walls, floor slabs and soffits. Leases specify which condition tenants must return the space in, so check yours before work is priced.
Helpful guides
Dilapidations and Strip Out at the End of a Commercial Lease
At the end of a commercial lease, the tenant usually has to remove alterations, reinstate the premises and carry out repairs and…
Read the guide →Commercial Strip Out Regulations UK: CDM, Asbestos and Waste
Commercial strip outs in the UK must comply with the Construction (Design and Management) Regulations 2015, which require planning and…
Read the guide →Get a free commercial strip out quote in Gravesend
Tell us what you need and we'll come back with a clear price.
Request a quote